
Get a free quote
We reply with a price. Nothing is booked until you say yes.
Rather talk? Call (815) 420-4117 or text us.
Short answer
Want a number for your own home?
Send where the mold is and what got wet. We reply with a written scope and price before anything is scheduled.
By area of the house
Mold remediation cost by area
Each range spans what three national cost guides, published or updated between August 2025 and February 2026, give for that part of a house. The notes keep each guide's own figure, so you can see how far apart they are.
| Area | National range | What the guides say |
|---|---|---|
| Bathroom | $500 to $2,000 | The three guides range from $500 to $1,000, $500 to $1,500 and $500 to $2,000. |
| Crawl space | $500 to $4,000 | Two guides say $500 to $2,000; the third $1,500 to $4,000. |
| Basement (part of it) | $500 to $6,000 | $500 to $3,000, $1,500 to $4,000, and $1,500 to $6,000 for a partial basement. Whole basement: $6,000 to $15,000. |
| Attic | $1,000 to $9,000 | $1,000 to $4,000, $1,500 to $6,000 for part of an attic, and up to $9,000. Whole attic: $6,000 to $15,000. |
| Inside wall cavities | $1,000 to $12,000 | $1,000 to $12,000 in one guide; another tops out at $20,000 for severe cases. |
| HVAC system and ductwork | $2,000 to $10,000 | $2,000 to $10,000 and $3,000 to $10,000. Air ducts alone run $600 to $2,000. |
| Air ducts only | $600 to $2,000 | One guide's figure for ducts without the air handler. |
| Whole house | $10,000 to $30,000 | All three guides: $10,000 or $15,000 up to $30,000. |
Source: National mold remediation cost guides (2025 to 2026 data)
By size
Mold remediation cost by square footage
Size is the single biggest driver. One guide breaks it into four tiers; the per-foot figure across the guides is $10 to $30, and labor runs $75 to $120 an hour.
| Affected area | National range | Roughly |
|---|---|---|
| 10 to 100 sq ft | $500 to $1,500 | A patch on one wall, a bathroom ceiling, a closet |
| 100 to 300 sq ft | $1,500 to $6,000 | Part of a basement or attic, several walls of a room |
| 300 to 1,000 sq ft | $6,000 to $15,000 | A whole basement or attic, or several rooms |
| Over 1,000 sq ft | $15,000 to $30,000 | Most of a house after flooding or a long leak |
| Under 10 sq ft | Often DIY | The EPA and IDPH say a patch under about 3 by 3 feet is usually a homeowner job |
Sources: National mold remediation cost guides (2025 to 2026 data); U.S. EPA, Mold cleanup in your home; IDPH, Mold FAQs
Common jobs
What the usual Rockford-area jobs include
The same national ranges, matched to the calls that come up most around here, with what a complete scope covers. If a quote leaves out a line in the right-hand column, ask why.
| Job | National range | A complete scope includes |
|---|---|---|
| Bathroom ceiling and tub surround | $500 to $2,000 | Containment at the door, removing stained drywall or caulk, cleaning, and fixing or rerouting the exhaust fan |
| Finished basement after seepage | $500 to $6,000 | Containment, cutting drywall and insulation 2 to 4 feet up, pulling carpet and pad, HEPA cleaning, drying, naming the water source |
| Whole basement after a flood or sewer backup | $6,000 to $15,000 | All of the above plus discarding porous material the water touched, which the EPA treats as contaminated |
| Attic sheathing from bath fans or blocked vents | $1,000 to $9,000 | HEPA vacuuming and cleaning the roof deck and rafters, removing wet insulation, and correcting the vent path |
| Crawl space joists | $500 to $4,000 | Cleaning joists and subfloor, removing damaged insulation, a new vapor barrier on the soil |
| Air ducts after a flood or a sweating coil | $600 to $2,000 | Cleaning sheet-metal runs, replacing wet lined duct, cleaning the blower and drain pan, sealing access holes |
Sources: National mold remediation cost guides (2025 to 2026 data); U.S. EPA, Mold cleanup in your home; U.S. EPA, Should you have the air ducts in your home cleaned?
Rebuilding is usually not in these numbers. Once the area is cleared, new drywall, paint, trim and flooring are a separate line or a separate contractor, and many homeowners save by handling that part themselves. Ask for the remediation and the rebuild priced separately so you can compare quotes line by line.
Doing a small area yourself costs little: an N95 or half-face respirator, gloves, goggles, heavy bags and cleaning supplies, which is what the EPA and IDPH describe for patches under about 10 square feet. The real expense in a DIY job is getting it wrong, especially cutting into old plaster or joint compound that may contain asbestos.
Inspection and testing
What a mold inspection costs
National guides put a mold inspection at $303 to $1,075, about $689 on average; homes under 4,000 square feet sit at the low end. A single air or surface test is $250 to $350.
Before paying for one, know what the agencies say: IDPH "generally does not recommend mold testing," the EPA says sampling is usually unnecessary when mold is visible, and there are no federal or Illinois limits to test against (IDPH, EPA). An inspection earns its cost when it finds hidden water or confirms a cleanup worked. More in do you need a mold test.
What moves the price
Why two quotes can be thousands apart
- How much is porous. Mold on concrete gets cleaned; mold on drywall, insulation and carpet pad gets cut out and hauled.
- Containment. A finished basement in a lived-in house needs plastic walls, a zipper door and negative air; an unused crawl space less so.
- Access. Attics with low pitch and crawl spaces under 2 feet are slow work.
- The water behind it. Sewage or river water means more goes in the dumpster.
- HVAC. Moldy duct lining is replaced, not cleaned, per the EPA.
- Rebuild. New drywall, paint and flooring are usually a separate line or a separate contractor.
Rockford factors
What makes Rockford jobs cost more, or less
Old houses
The median Rockford home was built in 1963, and 74.3% of the city's housing predates 1980 (Census). Opening walls in an older home can mean plaster instead of drywall, and plaster, joint compound or floor tile that may contain asbestos. Illinois EPA advises a qualified inspection before renovation (Illinois EPA). For buildings of five or more units, the federal asbestos rule adds a state notice and a $150 fee 10 working days ahead (Illinois EPA).
Basements
Most local jobs are basements, which is where the per-foot math adds up: a basement wall cut out two feet high around a 30 by 40 foot room is about 280 square feet of drywall before anyone touches a joist.
Flood water
Winnebago County has 1,729 FEMA flood insurance claims since 1978 (OpenFEMA). River and sewer water is treated as contaminated, so more material goes and the job gets bigger. See mold after a flooded basement.
Registration and insurance
Since September 23, 2026, Illinois remediators must register with IDPH and carry pollution or mold coverage of at least $500,000 per occurrence on top of general liability and workers' comp (IDPH). A rock-bottom bid from someone who can't show registration is not a bargain. See Illinois mold remediation registration.
Who pays
Insurance, taxes and help paying
The Illinois Department of Insurance says homeowners policies may cover mold from sudden, accidental water damage like a burst pipe, but mold from slow leaks, seepage or humidity is probably not covered (IDOI). Some policies cap mold with a sublimit, so check yours.
Mold work on the home you live in is usually not tax deductible; on a rental it generally is. See can you write off mold remediation, and for programs around Rockford, what if you can't afford it.
Red flags
Quotes to be careful with
- No containment on a job bigger than a closet.
- Fogging or spraying only, with nothing cut out and nothing about the water.
- An expensive air test sold first when the mold is plainly visible.
- A scope that never names the moisture source.
- No IDPH registration, or no answer about who certified the crew.
- Pressure to sign the same day.
Getting an accurate quote
What to send for a real number
- 1.Where the mold is: basement wall, attic, bathroom ceiling, crawl space.
- 2.Roughly how big: a patch, one wall, a whole room.
- 3.What got wet and when: a leak, a storm, a sump failure.
- 4.Two or three photos, one wide and one close.
- 5.Whether the area is finished (drywall, carpet) or bare.
- 6.Anyone in the home with asthma or a weak immune system.
Each service is described on the mold remediation Rockford homepage, with ducts on air duct mold removal and rentals and offices on commercial mold remediation.
Common questions
Mold remediation cost questions
How much does mold remediation cost in Rockford, IL?
No Rockford or Illinois price data is published. National cost guides put a typical job at $1,223 to $3,758, about $2,369 on average, or $10 to $30 per square foot. A whole house runs $10,000 to $30,000.
How much does mold remediation cost in Illinois?
The same national ranges apply; we found no Illinois-specific figures from any source. Illinois's new IDPH registration and insurance requirements (effective September 23, 2026) may show up in prices over time, but nobody has measured that yet.
How much does basement mold remediation cost?
National guides put part of a basement at $500 to $6,000 and a whole basement at $6,000 to $15,000. Wet drywall on several walls, carpet and pad, and the dehumidifier time are what move it.
How much does attic mold removal cost?
$1,000 to $9,000 in national guides, with a whole attic at the top of that range. Fixing the bath fan vent or soffit ventilation that caused it is usually separate.
How much is a mold inspection?
National guides put a mold inspection at $303 to $1,075, about $689 on average, and one air or surface test at $250 to $350. IDPH, the EPA and the CDC say testing is usually unnecessary when mold is visible.
Does insurance pay for mold remediation in Illinois?
Insurance pays only when the mold follows a sudden, covered water loss like a burst pipe, per the Illinois Department of Insurance. Slow leaks, seepage and humidity are probably not covered, and flood needs flood insurance. See does insurance cover mold.
Why do mold remediation quotes vary so much?
Scope. One quote may include containment, cutting out wet drywall, HEPA cleaning, drying and a moisture fix; another may be a spray-and-wipe. Compare what each written scope removes, contains and fixes, not just the total.
Can I lower the cost by doing part of it myself?
Areas under about 10 square feet are usually a DIY job, per the EPA and IDPH. On bigger jobs you can clear the room of belongings and handle the rebuild after the remediation is cleared. See can you remove mold yourself.
Get a written price
Rockford, Loves Park, Machesney Park, Belvidere, Roscoe, Rockton and Cherry Valley. Tell us where the mold is and what got wet.
