
Get a free quote
We reply with a price. Nothing is booked until you say yes.
Rather talk? Call (815) 420-4117 or text us.
Short answer
Want a price on air duct mold removal?
Call, text, or send the form. You get a written price back before any work is scheduled.
When ducts actually need it
Duct cleaning is sold hard, and most homes do not need it. The EPA's own guidance says that if nobody in the house has allergies or unexplained symptoms and a look inside the ducts shows no musty odor or visible mold, cleaning is probably unnecessary (EPA on air duct cleaning). It names one clear reason to act: substantial visible mold growth inside hard sheet-metal ducts or on other parts of the heating and cooling system.
The EPA also warns that many parts of a system can't be seen without opening them, so ask whoever is doing the work to show you the mold they say is there. Something that looks like mold can only be confirmed by an expert, sometimes with a lab check of a tape sample.
Sheet metal, duct board and lined ducts are different jobs
Bare sheet metal can be cleaned: the growth is vacuumed with HEPA equipment, the surfaces wiped, and the system run again once the cause is fixed. Ductwork lined with fiberglass, or built from fiberglass duct board, is another story. The EPA says insulated ducts that got wet or moldy cannot be effectively cleaned and should be removed and replaced. That is why two Rockford houses with the same musty smell can get very different prices.
Why Rockford furnaces and ducts get wet
The EPA says condensation on or near the air conditioning coil is a major cause of moisture in duct systems, and that controlling moisture is the most effective way to prevent growth. Rockford runs its systems hard both ways: NOAA's 1991 to 2020 normals for the Rockford airport show about 6,497 heating degree days and 838 cooling degree days a year, with July averaging a high near 84 degrees (NWS Rockford normals). Summer is when the coil sweats and the drain pan backs up.
The other cause here is water from below. Most Rockford-area furnaces sit in the basement, and the area's FEMA flood insurance claims are mostly basement claims: 492 of the 814 claims filed from City of Rockford ZIP codes since 1978 were for buildings with a basement (OpenFEMA). A furnace that sat in a few inches of floodwater, or returns that pulled damp air off a wet floor for a week, is the classic duct mold call. See mold after a flooded basement in Rockford.
Biocides and sealants: ask before you say yes
Some duct services offer to spray a chemical biocide or coat the inside of the ducts with a sealant. The EPA says research has not shown that these work in duct cleaning, or what their health effects are, and that no chemical biocides are currently registered by the EPA for use in internally insulated duct systems. Its advice is not to allow them unless you fully understand the pros and cons. Mold remediation that removes the growth and fixes the moisture does not depend on a spray.
How a duct job usually goes
- Find the moisture: the coil, the condensate drain, a duct running through a damp crawl space, or flood water.
- Shut the system down so it stops spreading spores through the house.
- Open access points, HEPA-vacuum and clean sheet-metal runs, and replace lined duct or duct board that got wet.
- Clean the blower, coil housing and drain pan, then seal and re-insulate the access holes airtight, as the EPA advises.
- Run the system and check the rooms the ducts feed for a musty odor or new growth.
What it costs
National guides put air ducts alone at $600 to $2,000, and HVAC mold remediation that includes the air handler at $2,000 to $10,000. Replacement duct runs, a new coil or a flooded furnace raise the number fast. Every range on this site, with its source, is on the mold remediation cost page.
Mold in the ducts usually means mold somewhere else too: a basement wall, the joists above the furnace, or a crawl space the return pulls from. Those are covered on the mold remediation Rockford homepage, and the commercial side, rooftop units and shared ductwork, on commercial mold remediation.
Sources: U.S. EPA, Should you have the air ducts in your home cleaned?; National Weather Service, Rockford climate normals 1991-2020; FEMA, OpenFEMA NFIP redacted claims; National mold remediation cost guides (2025 to 2026 data)
Where this is done
Air Duct Mold Removal in Rockford and the towns around it. Each town page has its own housing age, flood record and code office; the rest are on the service area page.
Common questions
Air Duct Mold Removal: questions
How much does air duct mold removal cost in Rockford?
National cost guides put the ducts alone at $600 to $2,000, and HVAC mold remediation that includes the air handler at $2,000 to $10,000. Lined ducts that have to be replaced cost more than cleaning sheet metal. Every range is on the cost page.
Can moldy air ducts be cleaned, or do they have to be replaced?
Bare sheet-metal ducts can be cleaned. The EPA says insulated ducts, fiberglass-lined duct or duct board, that get wet or moldy cannot be effectively cleaned and should be removed and replaced.
Should I let a company spray a biocide in my ducts?
The EPA says research has not shown chemical biocides or sealants work in duct cleaning, that none are registered by the EPA for internally insulated ducts, and that you should not allow them unless you fully understand the pros and cons.
How do I know if there is mold in my ducts?
A musty smell when the system kicks on, visible growth at the registers or inside the blower compartment, or a recent flood around the furnace are the usual signs. The EPA suggests asking the service provider to show you the mold; a lab can confirm a tape sample.
What causes mold in HVAC ducts?
Moisture. The EPA names condensation on or near the cooling coil as a major factor, along with leaks and poor installation. In Rockford, basement flooding around the furnace is the other common cause.
Will cleaning the ducts fix a musty basement?
Duct cleaning alone rarely fixes it. The ducts often pick up spores from a damp basement or crawl space. If the source is not fixed, the EPA says the growth will come back.
Does a duct cleaner need to be registered in Illinois?
Anyone who performs mold remediation for pay in Illinois must register with IDPH under the Mold Remediation Registration Code in effect since September 23, 2026. See Illinois mold remediation registration.
Other services
- Basement moldWalls, joists and finished basements after leaks, seepage or a flood.
- Attic moldRoof sheathing and rafters, plus the venting or bath fan that caused it.
- Crawl space moldJoists, subfloor and vapor barrier in damp crawl spaces.
- Bathroom moldCeilings, tub surrounds and the wall behind a leaking shower.
- Mold after water damageFlooded basements, burst pipes and sewer backups, dried and cleaned.
- Black mold removalDark growth on drywall and wood, removed like any other mold.
- Mold inspection and testingFinding the moisture source and how far the growth runs.
- Commercial and rental buildingsApartments, rentals, offices and stores.
Air Duct Mold Removal around Rockford
Tell us where the mold is and what got wet. We reply with a written price, and nothing starts until you agree to it.
